Fill out the form below to request iCare Tonometer single-use disposable probes.
Note*: We only process iCare probe orders if you have purchased an iCare tonometer from Blue River Medical, Inc. previously, or have a practice location in the following states: Arizona, Colorado, New Mexico, Nevada.
The iCare will forever change the way you measure IOP
UNIQUE TECHNOLOGY ENABLES SAFE, PAINLESS AND HYGIENIC IOP MEASUREMENT
Icare rebound tonometer was developed to find a new, easy and patient-friendly method of measuring intraocular pressure. It is a major breakthrough obtained after a decade of development work by a Finnish MD, Mr. Antti Kontiola. The realization of the rebound method has involved a number of clinical test partners, including the Helsinki University Eye Clinic (Finland) in the human application, and the Mount Sinai Medical School (US) in the animal application.
- Glaucoma is progressive disease which causes permanent damages to
- Optic nerve
- Optic field
- Main risk factors of glaucoma
- Increased IOP (= intra-ocular pressure)
- Family history of glaucoma
- Exfoliation Syndrome
- Target of Glaucoma treatment
- To prevent eye sight damage and blindness
- So far the only treatment method is to lower IOP
- Can gradually steal sight without any warning or symptoms
- Incurable disease which can cause blindness if untreated
- Blindness is ranked 3rd (after cancer + heart disease) as people’s major fear
- Glaucoma causes 9 – 12 % of all blindness
- Early detection is vital to stop the progress of the disease, but vision lost cannot be regained
- Most important, and only method to screen masses of population is rapid IOP measuring
Here are some of the most Frequently Asked Questions about the iCare Tonometer:
IS THE ICARE MEASUREMENT PAINLESS?
Measurement is painless, the light-weight probe touches the cornea momentarily and some patients don’t even notice the measurement.
IS IT POSSIBLE TO HURT THE EYE WITH ICARE?
If the device is used according to the instructions given in user manual, the light-weight probe cannot cause any damage to the patient’s eye.
IS THE ICARE MEASUREMENT RESULT ACCURATE?
Several independent studies prove the accuracy of Icare readings. Extensive bench testing and clinical studies have also been performed to ensure the accuracy and repeatability of measurements.
WHY SIX MEASUREMENTS?
Six measurements are required to provide accurate measurement results by eliminating the variations caused by operator error and heart rate.
DOES ICARE TAKE INTO CONSIDERATION CCT?
Icare tonometer is calibrated for average CCT just like the Goldmann tonometer.
CAN ICARE BE USED WITH CONTACT LENSES?
Yes, but depending on the type of contacts the tonometer readings may be affected by the contact lens. Soft daily disposable lenses (and some soft 2-week or monthly lenses) affect the reading only slightly. Hard contact lenses have a significant effect on the reading and should not be worn when measuring the IOP with Icare tonometer. For most accurate measurement results use of any contact lenses is not recommended.
CAN ICARE BE USED AFTER EYE SURGERY?
Yes, but consider that some of surgeries e.g. LASIK and similar surgeries may change the thickness of the cornea (thinner cornea => lower /false IOP)
CAN ICARE BE USED WHEN THE EYE IS INFECTED?
Yes. Just remember that the probe used to measure the infected eye cannot be used again, even for measuring the non-infected eye of the same patient.
DOES THE CORNEAL SHAPE AND RADIUS INFLUENCE THE IOP READING TAKEN WITH ICARE?
No. The area of contact is so small, that the measurement is not influenced by these aspects.
CAN ANESTHESIA STILL BE USED?
Icare is designed to be used without applying topical anesthetic. For most accurate measurements, we recommend not to apply topical anesthetic when measuring with Icare tonometer. It is possible to measure anesthetized eye but the readings may be affected by the swelling caused by topical anesthetic.
IS IT POSSIBLE TO LOAD PROBE WRONG WAY?
No, it’s not possible to load the probe wrong way. The mechanical design of probe and probe base makes it possible to insert the probe in a correct way.
CAN SAME PROBE BE USED TO MEASURE BOTH EYES OF ONE PATIENT?
Yes, same probe can be used to measure both eyes of one patient if the patient’s eyes are healthy. If the patient has infection in one eye or if there is any doubt that one eye may havea disease that can be transferred from eye to eye, the healthy eye should be measured first. A probe used to measure an infected eye should never be usedto measure a healthy eye. If in doubt, always use a new probe.
HOW PROBES WILL BE DISPOSED OF?
Probes can be disposed of according to the hospital/clinic/practice standard regulations.
DOES ICARE REQUIRE CALIBRATION?
Icare tonometers do not require any maintenance calibration or regular service. The tonometers don’t have any parts that wear out, except for the probe base, which can become dusty or collect some particles that affect the probe movement. The probe base can be changed by the user as described in the user manual. The calibration can be checked if there’s doubt about the measurement results. In such case, you should contact your local dealer/ distributor.
If the tonometer requires service, for example has been dropped to the floor, you should also contact your local dealer/ distributor for further instructions.
Still can’t find what you’re looking for? Request Support.
ICARE TECHNICAL SERVICE, MAINTENANCE AND REPAIRS
ICARE REPAIR AND MAINTENANCE SERVICE
Icare warranty, repair and maintenance services are available via our global distributor network.
» Find your local Icare Distributor
When sending the Icare tonometer to the service, please fill in and print ICARE SERVICE REQUEST form, and attach it to your tonometer when shipped for service.
» Icare Service Request form
CHANGING AND CLEANING THE PROBE BASE
Icare rebound tonometers do not require any maintenance calibration or regular service. The Icare tonometers don’t have any parts that wear out, except for the probe base, which can become dusty or collect some particles that affect the probe movement.
Nevertheless our technology does not require maintenance calibration, we do supply calibration service with calibration certificate. To have your Icare tonometer calibrated, please contact your local Icare distributor.
SPARE PARTS & ACCESSORIES
A range of spare parts for Icare tonometer is available via our distributors.
Icare Spare Parts & Accessories
The device conforms to CE regulations.
13 – 32 mm (W) * 45 – 80 mm (H) * 230 mm (L).
155 g (without batteries), 250 g (4 x AA batteries).
Power supply: 4 x AA batteries.
Measurement range: 7-50 mmHg,
Display range: 0-99 mmHg
(IOP estimation beyond the measuring range).
(95% tolerance interval relative to manometry): ±1.2 mmHg (≤20 mmHg)
Repeatability (coefficient of variation): <8%.
Accuracy of display: 1.
Display unit: Millimeter mercury (mmHg).
There are no electrical connections from the tonometer to the patient.
The device has B-type electric shock protection.
Storage/transportation environment: Temperature +5 to +40 °C.
Rel. humidity 10 to 80% (without condensation)
Hand-painted iCare Tonometers Make A Statement…
For a limited time iCare Tonometer’s are being hand painted from Finland in unique designs and bright colors.